1300 667 664

8:30am to 5:00pm (Mon-Fri)

Angle Bracket - Stainless Steel (Pk 100)

    Angle Bracket - Stainless Steel (Pk 100)

    Tax included. Shipping calculated at checkout.
      For use on cladding when installing bird netting on buildings or other structures. These angle brackets hold the wire rope / cable against the outside perimeter and prevent the net from pulling in at the sides.

      To be fixed into position using a Self Drill Screw or Self Tap Screw

      Once installed, feed the wire rope through the other hole.

      1.5mm thick plate – each side measures 21mm long by 19mm wide.

      6mm hole centred at 8.5mm from end on each side.